Speaker - GE Transport Pro Service Manual

Speaker

8-12
Disassembly: FRU Replacement
1. Remove the back plastic. See
2. Remove the display subassembly. See
page 8-7.
3. Remove the four screws holding the speaker onto the shield.
4. Disconnect the speaker harness from the shield.
5. Install the new speaker.
6. Connect the speaker harness.
7. Secure the speaker to the main processor PCB with the four screws
(PN 2000540-007).
8. Reinstall the main processor PCB. Be sure to reconnect the backlight
friction, keypad PCB and display friction connectors to the main
processor PCB.
9. Secure the main processor PCB to the display assembly with the four
screws (PN 2000540-007).
10. Assemble the back plastic. See
Transport Pro
2012659-042
"Back Plastic Disassembly"
"Display Subassembly"
"Back Plastic Assembly"
on page 8-4.
on
634A
on page 8-6.
Revision A