Front Plastic Subassembly - GE Transport Pro Service Manual

Front Plastic Subassembly

Revision A
Disassembly: FRU Replacement
1. Remove the back plastic. See
2. Remove the main processor PCB and LCD from the front plastic.
3. Pull out the display friction connector from the main processor PCB.
4. Install the new front plastic.
5. Reinstall the main processor PCB. Be sure to reconnect the backlight
friction, keypad PCB and display friction connectors to the main
processor PCB.
6. Secure the main processor PCB to the display assembly with the four
screws (PN 2000540-007).
7. Assemble the back plastic. See
Transport Pro
2012659-042
"Back Plastic Disassembly"
"Back Plastic Assembly"
on page 8-4.
633A
on page 8-6.
8-11