Alarm Light - GE Transport Pro Service Manual

Alarm Light

8-14
Disassembly: FRU Replacement
9. Assemble the back plastic. See
1. Remove the back plastic. See
2. Remove the display subassembly. See
page 8-7.
3. Disconnect the alarm light cable harness from the alarm light PCB
and the main processor PCB.
4. Replace the alarm light PCB and alarm light harness.
5. Connect the alarm light cable harness to the alarm light PCB and
main processor PCB.
6. Assemble the back plastic. See
Transport Pro
2012659-042
"Back Plastic Assembly"
"Back Plastic Disassembly"
"Display Subassembly"
"Back Plastic Assembly"
on page 8-6.
on page 8-4.
on
625A
on page 8-6.
Revision A