Fru Replacement; Display Subassembly - GE Transport Pro Service Manual

FRU Replacement

Display Subassembly

Revision A
Disassembly: FRU Replacement
1. Remove the back plastic. See
4.
2. Remove the display subassembly.
a. Remove the four screws holding the main processor PCB to the
display assembly.
b. Pull out the backlight friction connector from the inverter PCB.
Do not pull on the connector wires.
c. Squeeze the connector tabs and pull out the connector from the
Transport Pro
2012659-042
"Back Plastic Replacement" on page 8-
629A
630A
8-7