Table of Contents
Advertisement
7 Repair procedures
7.9.12 Replace alarm
speaker B
7-40
The alarm speaker B is located on the rear of the sub chassis. To replace the alarm
speaker:
1. Open the main engine according to section 7.2.5.
2. Unplug alarm speaker connector X 16.
3. Remove the two mounting screws of the alarm speaker on the back panel.
4. Replace the alarm speaker.
5. Mount the alarm speaker with a spacer per screw between sub chassis and
alarm speaker, the cable towards the middle of the sub chassis.
6. Connect the alarm speaker connector X 16.
7. Close the main engine, add expiratory valve.
8. Verify proper function after reassembly by performing a power-up test.
TRM, Centiva/5 Plus, M1047448/CM-922026, rev. 3.50.a
Advertisement
Table of Contents
