Display Tests; Speaker Test - GE Transport Pro Service Manual

Display Tests

Video Test Screens
Brightness Level Test

Speaker Test

4-28
Maintenance: Checkout Procedure
1. Activate the Boot Loader program as follows:
a. Hold down NBP GO/STOP and ZERO ALL on the front panel.
b. Press and release the Trim Knob control.
c. Keep holding NBP GO/STOP and ZERO ALL until the Boot
Loader information appears on the display.
2. From the Service Menu, select Video Test Screens.
3. Select and test each screen:
‹
White Screen.
‹
Red Screen.
‹
Blue Screen.
‹
Green Screen.
‹
Vertical Bars.
4. Select Exit to exit Video Test Screens.
5. Manually reboot the monitor to exit the Boot Loader program.
a. Hold down the NBP GO/STOP and ZERO ALL.
b. Press and release the Trim Knob control.
c. Release NBP GO/STOP and ZERO ALL.
1. Select MORE MENUS > MONITOR SETUP > BRIGHTNESS.
2. Verify the display brightness changes when setting the brightness
level from 100% to 10%. Reset the brightness level to your default
setting.
1. Change the alarm volume of the monitor to 100%.
‹
Select MORE MENUS > ALARM CONTROL > ALARM VOL: to
display the volume settings popup menu.
2. Verify the speaker volume of the monitor changes accordingly.
3. Return the volume of the monitor to the level it was previously set to,
before you changed it for this test.
Transport Pro Patient Monitor
2012659-002
Revision A