GE Transport Pro Service Manual page 82

8-20
Disassembly: FRU Replacement
4. Slide the TRAM chute to the left to capture the mounting tabs in the
mounting slots.
5. Replace the TRAM chute mounting screw (PN 2000546-005).
6. Install the TRAM module.
a. Facing the chute, guide the back end of the module into the slot.
b. Gently push the module into the chute. You will hear a click
when the module is fully inserted.
7. Insert the TRAM communication cable into Video In connector on
the left side of the monitor.
8. Insert the other end of the TRAM communication cable into the
TRAM module's DISPLAY (DISPL) connector on the front of the
TRAM module.
Transport Pro
2012659-042
Revision A