Main Processor Pcb Subassembly - GE Transport Pro Service Manual

Main Processor PCB Subassembly

Revision A
Disassembly: FRU Replacement
1. Remove the back plastic. See
2. Remove the seven screws from the battery housing located in the
back half of the monitor.
3. Remove the battery harness from the back half of the monitor.
4. Remove the display subassembly. See
page 8-7.
5. Remove the main processor PCB subassembly. Follow your country
requirements for PCB disposal.
Transport Pro
2012659-042
"Back Plastic Disassembly"
"Display Subassembly"
on page 8-4.
636A
637A
on
8-9