Case 845B VHP Operator's Manual page 120

CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
Transmission fluid Level
Check the transmission fluid level while still warm. Put transmission in Neutral position, keep engine running at low
idle with parking brake applied. Turn rod of cover upper part clockwise to release it. Push out the cover and check the
dipstick. Add fluid until the maximum mark of dipstick, as necessary. After the level has been checked, make sure that
the dipstick cover is properly tightened.
Zf TRANSMISSION fLUID DIPSTICK fUNK TRANSMISSION fLUID DIPSTICK
Correct level with fluid at operation temperature
WARM
ENGINE RUNNING
Minimum with cold fluid
ZF TRANSMISSION FLUID DIPSTICK FUNK TRANSMISSION FLUID DIPSTICK
(845B / 865B / 885B MODELS)
(845B / 865B / 885B MODELS)
6-33 and 6-34.
For additional information, refer to "Checking of Transmission Fluid Level" in the page
6-10