Neutral Start and Reverse Warning Checks
IMPORTANT: Perform these checks before operating machine.
NEUTRAL START CIRCUIT CHECK
Be sure the area around machine is clear of personnel.
•
Disengage the parking brake.
•
Completely depress the inching control pedal (only for
•
845B, 865B and 885B models with FUNK transmis-
sion).
Move transmission control lever to the forward position.
•
The starting motor must not run.
•
O motor de partida NÃO DEVE funcionar.
•
Move the transmission control lever to the reverse po-
•
sition.
Turn the key switch to START.
•
The starting motor must not run.
•
IMPORTANTE:
1.
Move the transmission control lever to the reverse po-
sition.
Engage the parking brake.
•
Turn the key switch to START.
•
The starting motor should run.
•
2.
Move the transmission control lever to the neutral po-
sition.
Engage the parking brake.
•
Turn the key switch to START.
•
The starting motor should run.
•
3.
Move the transmission control lever to the forward po-
sition.
Engage the parking brake.
•
Turn the key switch to START.
•
The starting motor should run.
•
CHAPTER 2 – SAFETY / DECALS / HAND SIGNALS
ADDITIONAL SAfETY RULES
REVERSE WARNING ALARM CHECK
Be sure area around machine is clear of personnel.
•
Engage the parking brake.
•
Completely depress the inching control pedal (only for
•
845B, 865B and 885B models with FUNK transmis-
sion).
Move transmission control lever to 1st gear in Reverse.
•
The reverse warning alarm must sound.
•
For more information, see "Inching Control Pedal", "Trans-
mission Control Lever", "Ignition Switch", in the section
"Instruments and Controls".
2-5