Case 845B VHP Operator's Manual page 201

CNH – laTIN aMERICa lTDa., manufacturer of CASE equipments warrants all its new products against any defects of
workmanship or material through its new work of authorized dealership.
THE AUTHORIZED DEALER will repair in his own installation the equipment or any part of the equipment; which accor-
ding to the technical analysis presents a failure or material defect, at not cost for the end user, including the labor for the
installation of the part in reference for a period of 12 (twelve) months unlimited hours beginning from the date of delivery.
This warranty does not include, expenses such as transport of this equipment or its components to the installations
of the Distributor, as well expenses such as stay and travel if the end users decides to get the work done outside the
Dealer's installation. In this case the AUTHORIZED DEALER must present by writing to the customer an ESTIMATED
cost for his PREVIOUS APPROVAL.
The contractual warranty of the equipment is subject to the execution of all scheduled service, as defined in the manual of
operation and maintenance performed by authorized service personnel of CASE, including the delivery of technical.
Parts installed as replacement will be covered under the remaining warranty period.
Original parts purchased through a CASE Dearlership will also have a warranty of 90 (ninety) days from the invoiced date
of purchase, under the same parameters of CASE warranty policy. If applied by authorized dealer, original parts, will have
a warranty of (180) days. This warranty is subject to the realization of the technical delivery.
THIS IS THE ONLY WARRANTY OFFERED AND REPLACES ANY OTHER EXPRESSED OR IMPLIED. THERE ARE
NOT OTHER WARRANTY OF CNH WHICH WILL SURPASS THE HERE STATED .
EXCLUSIONS AND LIMIT LIMITATIONS TIONS – This WARRANTY would not apply in case of:
Verify through the technician analysis, THE IMPROPER USE OR MAINTENACE, NEGLET, INCAPACITY OR AC-
•
CIDENT, IN ADDITION TO IMPLEMENTS AND/OR PARTS NOT CERTIFIED BY CNH, AND/ OR USE OF NON-
RECOMMENDED LUBRICANTS AND OILS;
New products which are subjected to operations which exceed the recommended capacity or is used for applications
•
no recommended;
Equipments that have been altered or repaired in a way not authorized by
•
ducts;
Equipment to which preventive maintenance or inspections have not been done according the specification establi-
•
shed for CASE equipment.
Components which are covered by their own manufacturer such as tires, electrical components, and fuel injection
•
components.
Defects caused by modification or installation of parts or components no authorized by
•
products.
Monetary Loss, inconvenience, commercial or consequent damaged caused by a failure or cost caused by rented
•
equipment.
Normal wear items such as: brakes discs, clutches, cutting edges, cutting knife, bolt, lubricated joints(pins, bushing),
•
parts wear due to ground contact, oils, lubricants, exhaust or associated parts, injectors, belts, lamps, glasses, light
bulbs and fuses.
THE RESPONSAbILITY Of CNH OR THE AUTHORIZED DEALER
•
tion, instructions or effects of any source, will be limited to the repair or delivery of the parts, new or reconditioned,
under the conditions previously stated.
CNH Latín América Ltda reserves the right to revise, modify or discontinue any product at any time without implying to
do the same to products already marketed.
Chapter 12
WARRANTY
TERM Of WARRANTY
CaSE Products – Construction line
CNH – laTIN aMERICa lTDa.
CNH, the manufacturer of CASE pro-
CNH. Manufacturer or CASE
, be by civil contract or imply warranty, declara-
12-1