Case 845B VHP Operator's Manual page 49

H. STOP MAIN INDICATOR LIGHT (RED, CRITICAL)
The stop main indicator light is an indicator for critical warnings. Refer to critical warning indicator lights.
Critical Warning Indicator Lights
When the Stop Main Indicator Light turns on, the machine must be stopped safely and the engine STOPPED immedia-
tely. The non compliance of this instruction may result in injury and/or damage to the machine.
The following table lists some of the critical warning indicators that may be shown on the cluster assembly, and the
necessary corrective action. When a failure occurs, a continuous sound alarm is heard and a RED stop main indicator
light is displayed on the message area.
Display
ENGINE OIL PRESSURE
BRAKE PRESSURE
COOLANT
TEMPERATURE
HYDRAULIC OIL
TEMPERATURE
TRANSMISSION OIL
TEMPERATURE
CHAPTER 3 – INSTRUMENTS AND CONTROLS
I
Critical Warnings
Description
Low Engine Oil Pressure
Below 10 PSI.
Low Brake Pressure.
High Engine
Coolant Temperature.
High Hydraulic
Oil Temperature.
High Transmission
Oil Temperature
H
Corrective Action
Bring the machine to a safe stop and shut the engine OFF immediately.
Contact your Dealer.
Bring the machine to a safe stop and shut the engine OFF immediately.
Contact your Dealer.
Bring the machine to a safe stop and shut the engine OFF immediately.
Check the coolant levels after allowing the engine and the coolant to
cool down. Contact your Dealer.
Bring the machine to a safe stop and shut the engine OFF immediately.
Contact your Dealer.
Bring the machine to a safe stop and shut the engine OFF immediately.
Contact your Dealer.
3-9