fuel Tank Drain Cock Clean
Open the drain cock, before engine start and allow wa-
ter or sediment to drain. Close the drain cock when fuel
runs out.
WARNING: Extinguish all smoking materials
or open flames before opening the sediment
drain due to presence of flammable fluids.
CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
fuel filter Replacement
Clean the area around the fuel filter (1) and fuel water
separator filter (2) to avoid contamination.
2
1.
FUEL FILTER
2.
WATER SEPARATOR FILTER
Remove the filters and clean carefully the area around the
filter head gasket. Change the fuel filters and sealing rin-
gs. Fill the filters with clean fuel and lubricate the sealing
rings with new engine oil. Assemble the filters and tight
them manually. After the assembly, make the fuel system
air bleed procedure.
ATTENTION: Dispose used filters in speciali-
zed recycling stations.
1
6-27