Table of Contents
Advertisement
I. WARNING MAIN INDICATOR LIGHT (YELLOW, NON-CRITICAL
The warning main indicator light is an indicator for non-critical warnings. Refer to "Non-Critical Warning
Indicator Lights".
Non-Critical Warning Indicator Lights
When the warning light turns on, alter the operation mode, program an interruption for the maintenance works or, if the
condition persists, contact your dealer. The following table lists some of the warnings that may be shown on the cluster
assembly, and the necessary corrective action.
When a failure occurs, a sound alarm is heard for 3 seconds and the YELLOW warning main indicator light turns on
and is displayed on the message area. When this occurs, take the machine back to the working location and stop the
engine to avoid onerous repair risks.
Display
PARKING BRAKE
COOLANT
TEMPERATURE
HYDRAULIC FLUID
TEMPERATURE
TRANSMISSION FLUID
TEMPERATURE
AIR FILTER
TRANSMISSION FILTER
HYDRAULIC FILTER
ALTERNATOR
FUEL
3-10
CHAPTER 3 – INSTRUMENTS AND CONTROLS
Non-Critical Warnings
Description
Parking brake engaged and shift
lever to F or R.
High engine
coolant temperature.
High hydraulic
fluid temperature.
High transmission fluid
temperature.
High air filter restriction.
Transmission filter high
restriction.
Hydraulic filter high
restriction.
Alternator malfunction.
Low fuel level.
Corrective Action
1.
Apply the brake pedal.
2.
Release the parking brake pedal before putting transmission selec-
tor lever in forward or reverse.
1.
Idle machine and monitor temperature.
2.
Clean radiator or operate fan reverser (If equipped).
3.
Check the coolant level and add coolant if necessary.
4.
If condition persists, contact your dealer.
1.
Idle machine and monitor temperature.
2.
Clean hydraulic fluid cooler or operate fan reverser. (If equipped)
3.
Check hydraulic fluid level.
4.
If condition persists, contact your dealer.
1.
Idle machine and monitor temperature.
2.
Clean transmission cooler or operate fan reverser. (If equipped)
3.
Use a lower gear.
4.
If condition persists, contact your dealer.
1.
Clean air filter.
2.
Replace primary and secondary filters.
3.
If condition persists, contact your dealer.
1.
Replace transmission filter.
2.
If condition persists, contact your dealer.
1.
Replace hydraulic filter.
2.
If condition persists, contact your dealer.
1.
Check electrical system.
2.
Voltages are out of range.
3.
Change operating procedure.
4.
If condition persists, contact your dealer.
1.
Fill fuel tank as soon as possible.
Hide quick links:
Advertisement
Table of Contents
