Case 845B VHP Operator's Manual page 126

front Wheel bearings
Loosen fixing bolts and remove cover.
Remove grease, clean bearing housing and fill it with 0.9
kg (each) of the specified grease. For more information
see Fluids and Lubricants.
FRONT WHEELS BEARINGS
6-16
CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
GREASE fITTINGS
Each 500 hours services
use litium based Grease with Molydissulfide (NlGI-2)
Rear Ripper Pivots and Cylinder
There are 8 lube points for ripper linkage and 2 for the
cylinder. Lubricate wit 4 to 6 grease shots.
1. RIPPER PIVOTS
2. RIPPER CYLINDER
2
1
1
1
1