Case 845B VHP Operator's Manual page 108

Adding Air to the Tires
1. Before you add air, have the wheel correctly installed
on the machine or put the wheel in a restraining devi-
ce (tire inflation cage).
2. Use an air hose with remote shut off valve and a self-
locking air chuck.
3. Stand BEHIND the tread of the tire and make sure
ALL persons are away from the side of the tire before
you start to add air.
4. Inflate the tire to the recommended air pressure. DO
NOT inflate the tire more than the recommended pres-
sure given on the following page.
5-2
CHAPTER 5 – WHEELS AND TIRES
Tire or Rim Service
Always have a qualified tire mechanic service the tires
and rims for this machine. It is recommended that you
have this mechanic inflate the tires. To prevent accidents,
use a restraining device (tire inflation cage), correct equi-
pment, and correct procedure.
Tire Tread Direction
When the tire is installed on the wheel make sure the tire
tread is in the direction shown.
WARNING: Explosive separation of the tire
(single piece rim) or the tire and/or rim parts
(multi-piece rim) can cause serious injury or
death.
REAR
FOR TRACTION
FRONT
FOR STEERING