Transmission fluid filter Change
Each 500 hours
WARNING: Never use gasoline, solvent or
other flammable fluids to clean parts. Use au-
thorized commercial, nonflammable, nontoxic
solvents.
Clean filter and surrounding area. Then remove the filter
housing, change the elements and gaskets. Clean the
inside of the filter housing and contact surface. Install
the new filter.
Lubricate the filter seal with a thin coat of clean fluid and
tighten the new filter until it contacts with the sealing sur-
face. Tighten the filter 1/3 to 1/2 a turn more.
ATTENTION: Dispose used filters in speciali-
zed recycling stations.
CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
ZF TRANSMISSION FLUID FILTER
(845B / 865B / 885B WITH ZF TRANSMISSION)
FUNK TRANSMISSION FLUID FILTER
(845B / 865B / 885B WITH FUNK TRANSMISSION)
6-35