Accessing The Product Configuration Software; Downloading And Installing Pcs - Extron electronics SW USB Pro Series User Manual

Command
Ethernet Port Configuration
Set Telnet port map
24
NOTE:
Telnet port 23 is disabled by default.
Reset Telnet port map
Disable Telnet port
View Telnet port mapping

Accessing the Product Configuration Software

The Extron Product Configuration Software offers another way to control the switchers via Ethernet or USB. The
graphical interface includes many of the same functions as those available via the device front panel and SIS
commands. PCS is compatible with most Microsoft® Windows operating systems.
The software is available at www.extron.com. This section provides instructions for downloading, installing, and
opening the software. For detailed information about configuring the device using PCS, see the SW USB Pro Help
File, provided with the software.

Downloading and Installing PCS

To download PCS from the
page.
Using the Download Center page
Figure 12. Download Tab and Software Button on the Download Screen
1. On the Extron website, select the Download tab (see figure 12,
Alternatively, hover the mouse pointer over the Download tab, then move the pointer to the Software link in
the Downloads column and click it.
ASCII Command
(Host to Unit)
E
port number
Z{
E }
Z 23 PMAP
E }
Z 0 PMAP
E }
24 Z PMAP
Extron website, locate it on the Download Center page or go to the PCS product
Response
(Unit to Host)
}
port number
}PMAP Pmap Z{
]
Pmap Z 00023
]
Pmap Z 00000
port number
{ }
SW USB Pro Series • Remote Configuration and Control
Additional Description
] Set the Telnet port number.
}
Set the Telnet port number to 23
(default).
Disable the Telnet port.
] View the current Telnet port.
), then click the Software button (
1
).
2
23