Delta Electronics ASDA-B Series User Manual page 232

Setting value of P2-10 ~ P2-15: 24
DI Name
Reserved
Setting value of P2-10 ~ P2-15: 25
DI Name
Torque limit - Reverse operation (Torque limit function is
TLLM
valid only when P1-02 is enabled)
Setting value of P2-10 ~ P2-15: 26
DI Name
Torque limit - Forward operation (Torque limit function is
TRLM
valid only when P1-02 is enabled)
NOTE
1) 14 ~ 17: Single control mode, 18 ~ 20: Dual control mode
2) When P2-10 to P2-15 is set to 0, it indicates output function is disabled.
Revision January, 2009
DI Function Description
DI Function Description
DI Function Description
Chapter 7 Servo Parameters|ASDA-B Series
Trigger Method
Trigger Method
Trigger Method
Control
Mode
Control
Mode
Level
P, S
Triggered
Control
Mode
Level
P, S
Triggered
7-79