Digital Input Terminal 6 (Di6); Digital Output Terminal 1 (Do1) - Delta Electronics ASDA-B Series User Manual

Chapter 7 Servo Parameters|ASDA-B Series
P2 - 15 DI6

Digital Input Terminal 6 (DI6)

Default: 21
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 126
Settings:
See P2-10 for explanation.
P2 - 16 Reserved
P2 - 17 Reserved
P2 - 18 DO1

Digital Output Terminal 1 (DO1)

Default: 101
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 110
Settings:
ASD-PU-01A
This parameter is used to determine the function and status of DO1.
• DO Function Settings:
For the setting value of P2-18 ~ P2-20, please refer to Table 7.B.
• DO Enabled Status Settings:
0: Normally closed (contact b)
1: Normally open (contact a)
Please re-start the servo drive after parameters have been changed.
7-44
Communication Addr.: 020EH
Related Section:
Section 3.3.4, Table 7.A
Communication Addr.: 0210H
Communication Addr.: 0211H
Communication Addr.: 0212H
Related Section:
Section 3.3.4, Table 7.B
ASD-PU-01B
Revision January, 2009