Using The Load Command Line Options - IBM Adaptec Ultra320 SCSI User Manual

IBM Ultra320 SCSI Controller 2 User's Guide

Using the Load Command Line Options

You can specify several command line options when the driver is
loaded. The available options are described in the table below. This
table describes command line options for the
for Ultra320 products.
adpu320.ham Command Line Options
Option Name
SLOT
/LUN
MAX_TAGS
VERBOSE
INSTRUMENTATION
MULTLUN_TARGETS
LUN_ENABLE
IO_MAPPED
READ_STREAMING
7-6
Default Acceptable
Value Values
If none specified, NeWare
prompts you to choose.
N/A N/A
16 1-128
off on,y,1,off, n
0ff on,y,1,off, n
FFFF 0-FFFF
1 (Scan 0-FF
LUN 0
only)
off on,y,1,off, n
off on,y,1,off, n
driver
adpu320.ham
Definition
Dependent on system
configuration. Obtains
a physical slot number
for the host adapter.
Scans all possible
LUNs.
Maximum number of
tagged I/Os which
will be active per
device.
Displays host adapter
information.
Enables/disables
recording of I/O
statistics and errors.
A bit mask to enable
LUNs on selected
targets.
LUN scan enables
mask on all targets
Disables the auto
detection of PCI-X and
forces the use of I/O
Mapped. The default
is off in which it will
automatically detect
the PCI-X slot and use
I/O Mapped, or use
memory mapped
otherwise.
Enables read
streaming to be
negotiated for all
drives.
.