Web Client: Account Settings - OnRobot 2FGP20 User Manual

ADDITIONAL SOFTWARE OPTIONS
Click on to set custom Adapter plate settings.
2. Click on the No eyes card to modify the Eyes preset settings.
3. Click on the No bracket card to modify the Angle Bracket preset settings.
4. Select mounting type.
5. Select tool.
Click on to get help about how to enter the values.
6. Click on Accessory to select any OnRobot accessories.
7. Click on Workpiece to enter the workpiece weight. Then the calculator calculates the
resulting payload mass considering the gripper, the mounting, and the workpiece mass.
8. Choose the unit of measure for the values you want to enter from the Size measurement,
Angle measurement, Weight measurement and Angle type dropdown menus.
The calculator calculates the values which you can see in the TCP (Tool Center Point) and
CoG (Center of Gravity) boxes. These values can be entered into the robot.

7.1.7. Web Client: Account Settings

This menu can be used to:
See the currently sign-id user
•
Go to Account settings
•
Sign-out
•
Account settings:
This page has two tabs:
My profile - to see and update the currently logged in users' profile (e.g.: change
•
password)
Users - to manage users (e.g.: add/remove/edit)
•
On the My profile tab to change any profile data (e.g.: password) click on the Update profile
button.
54