Table of Contents
Advertisement
Communicator Configuration
7.11
Apply Configuration
Before You Begin
When you apply the configuration, any existing configuration is overwritten.
Disconnect the Communicator from the Modbus TCP network
Before you can apply the configuration, ensure that there is no active communication on the
Modbus TCP network where the Communicator is connected.
Procedure
To make the settings take effect, download the configuration to the Communicator:
1.
In the web-interface header, click Apply
2.
To confirm download, click Apply.
→
The configured settings are downloaded and applied to the system.
®
™
Anybus
Communicator
User Manual
80 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
