Table of Contents
Advertisement
Use Cases
Set Up Node and Transactions
1.
Add a node and select it.
2.
In Node settings configure the node with the following settings:
Node settings
Node address
Name
Timeout time
Reconnecting time
Retries
3.
Add one transactions to the Barcode Scanner node and configure it with the following
settings:
The Barcode Scanner contains the following parameters
Transaction name
Read Barcode Data
Check the I/O Data Map
The transactions from the Barcode Scanner is mapped as follows in the I/O data map page.
Status word and actual speed from My Drive to Modbus TCP
Address
0-31
®
™
Anybus
Communicator
User Manual
Barcode Scanner Parameter
The variable data, 31 bytes, are forwarded from the Barcode Scanner to the PLC.
Value
The Barcode Scanner is set up as a node with Node
address 1.
Barcode Scanner
1000 ms (default)
1000 ms (default)
0 (default)
Transaction template
Read Barcode Data Template
106 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
