Table of Contents
Advertisement
Troubleshooting
12.1.2
Event Log
How To Analyze the Information
The log follows the FIFO principle, first in and first out. The oldest (first) value is processed first.
Time (d:hh:mm:
ss.ms)
Message
Severity
Source
Sub-source
To clear the current log, click Clear log.
®
™
Anybus
Communicator
User Manual
The date and time when the event occurred.
A brief description of the event.
The severity of the event occurred.
For description of the symbols, refer to
0
Communicator
1
High level network, Modbus TCP
2
Subnetwork, Serial RS-232/485
The nodes connected to the subnetwork and the PLC connected to the high level network.
If there is a problem with a node the node name is displayed in the Sub-source column.
Example: If the node name is 5, number 5 is displayed in the Sub-source column.
Communicator Status Monitor, p.
113 (124)
85.
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
