Communicator Configuration
7.10.1
Optimize the I/O Data Map
The optimize function is used to automatically remove gaps between the mapping.
If you optimize the I/O data map, the current I/O data map will be overwritten.
To optimize the map:
1.
Click Optimize.
2.
To confirm, click OK.
®
™
Anybus
Communicator
User Manual
Optimize remove gaps between the data objects in the map and should be used with care
on already commissioned systems. Expected mapping in the PLC may change.
72 (124)
SCM-1202-162 1.1 en-US