Table of Contents
Advertisement
Installation
5.2
DIN Rail Mounting
To attach the Communicator on the DIN rail:
1.
Insert the upper end of the DIN rail clip into the DIN rail.
2.
Push the bottom of the DIN rail clip into the DIN rail.
®
™
Anybus
Communicator
User Manual
The equipment must be electrically grounded through the DIN rail for EMC compliance.
Make sure that the equipment is correctly mounted on the rail and that the rail is
properly grounded.
17 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
