Table of Contents
Advertisement
Troubleshooting
12.3
Firmware Upgrade Error Management
If the firmware update process is interrupted or if the power is lost during the update process,
the Communicator goes into fallback mode.
The last working firmware is still available on the flash, but it is not active.
To complete the interrupted firmware update:
1.
Disconnect the Communicator from power.
2.
Reconnect the Communicator to power.
®
™
Anybus
Communicator
User Manual
117 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
