Table of Contents
Advertisement
Communicator Configuration
7.9.4
To Configure IP Settings Manually
1.
Deselect the DHCP enabled checkbox.
2.
Configure the IP settings.
Setting
IP address
Subnet mask
Gateway address
Primary DNS
Secondary DNS
If you change a value and click Refresh, the value is reset to the last applied value.
3.
To apply the settings, click Apply IP Settings.
7.9.5
Naming the Host
You can label the Communicator.
•
The maximum allowed length of the Hostname is 64 characters.
•
No symbol characters, punctuation characters, or whitespace are permitted.
•
Write the Hostname as one single word.
®
™
Anybus
Communicator
User Manual
Description
The Modbus TCP network IP address in IPv4 dot-decimal notation
The Modbus TCP network Subnet mask in IPv4 dot-decimal notation.
TheModbus TCP network Gateway address in IPv4 dot-decimal notation.
If there is no gateway available, set the Gateway address to: 0.0.0.0
The Modbus TCP network Primary DNS in IPv4 dot-decimal notation.
The Modbus TCP network Secondary DNS in IPv4 dot-decimal notation.
69 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
