Communicator Configuration
Setting
Data bits
Data bits is the number of bits used in the data representation of characters in the telegrams.
The rate for Modbus RTU is 8 data bits and can not be changed.
Parity
Specify if parity should be used to detect errors in the data.
3.
Select parity value from the Parity drop-down menu.
Setting
Parity
Stop bits
Specify the number of stop bits used to indicate the end of data transmission.
4.
Select a stop bits value from the Stop bits drop-down menu.
Setting
Stop bits
Apply configuration
5.
To apply the settings, click Apply in the web-interface header, and follow the instructions.
®
™
Anybus
Communicator
User Manual
Value
57600 baud
115200 baud
128000 baud
Value
Description
None | Default value
No parity checking
Parity bit is not transmitted
Odd
Odd parity checking
Even
Even parity checking
Value
1 stop bit | Default value
2 stop bit
38 (124)
SCM-1202-162 1.1 en-US