Table of Contents
Advertisement
Communicator Configuration
7.9.3
To Use DHCP Server
By default, the IP settings are provided by the high level network DHCP server.
The DHCP enabled checkbox is selected.
Default Communicator IP Settings
The Communicator comes with the following factory default IP settings:
Setting
Web configuration
IP address
Subnet mask
Gateway address
Primary DNS server
Secondary DNS server
DHCP
Host name
®
™
Anybus
Communicator
User Manual
Default value
0.0.0.0
255.255.255.0
There is no default Gateway address.
There is no default Primary DNS server.
There is no default Secondary DNS server.
Enabled
There is no default Host name.
68 (124)
SCM-1202-162 1.1 en-US
Advertisement
Table of Contents
