CKD MN4KB2 Series Instruction Manual page 34

６
MAINTENANCE
4) Air supply / exhaust block, valve block mounting
(1) First hook the fixed claw onto the rail and then push the moveble claw from
above.
(2) Slie them until there is no space between the blocks and push in the
connecting key.
5) Air supply / exhaust block, valve block detaching
(1) Remove the end block.
(2) Pull out the connecting key
(3) Slide the blocks 4mm or more from each other, lift the side with the movable
claw to remove the block.
[SM-213928-A/2]
―33―