CKD MN4KB2 Series Instruction Manual page 24

４
INSTALLATION
5) Wiring of the C-type, D-type connectors
Wire the terminal box by following ① to ⑥ in the illustration.
Plug-in connector
D type
Unnecessary to
distinguish plus or minus
[SM-213928-A/2]
Socket ass'y
(Socket ＋ Crimp terminal)
⑥ Tightening screw
④ Insert a socket
180°
Built-in Surge suppressor
And Indicator light
available
Gasket
Coil ass'y
―23―
Crimp terminal
Caulking tool
③ Insert both caulked terminals into
the slots, farthest apart.
⑥Tightening screw
180°
⑤ Insert a gasket and connector

Tightening torque
0.3N・m
(made by CKD)
(made by CKD)
② Terminal caulking
① Lead wire AWG22 to 25
0.16 to 0.38mm
2
④Insert a socket
Plug-in connector
C type