®
R&S
SMM100A
5. To retrieve more information, zoom in. In some diagrams you can select
"Show Marker" to measure the distance, for example, between two signals.
In principle, the zoom in function works like the two-finger pinching for magni-
fying images on your cellphone.
6. In the "Constellation Diagram" dialog, select "Configure" to return to the
"Graphics Configuration" dialog.
Close the "Graphics Configuration" dialog.
This action has no effect on the configured graphics but on the dialog itself.
The block diagram displays the current signal routing. It indicates that fre-
quency and power offsets are enabled and displays the acquisition points for
the real-time diagrams minimized in the "Taskbar".
5.6
Saving and Recalling Settings
To restore the results of our measurements later, we save the instrument settings
to a file.
Getting Started 1179.1335.02 ─ 02
Trying Out the Instrument
Saving and Recalling Settings
57