R&S SMM100A Getting Started page 52

®
R&S SMM100A
To connect the instrument and the external trigger source
1. Use a suitable cable to connect the external trigger source to the User 2 con-
nector of the R&S SMM100A. See
Figure 5-6: Simplified representation of a test setup**
** = The figure depicts the cabling as a general principle; particular test setups do not require
all connections at the same time
Getting Started 1179.1335.02 ─ 02
Triggering the Instrument with an External Signal
Figure 5-6.
Trying Out the Instrument
52