Connectors - R&S SMM100A Getting Started

®
R&S SMM100A
4.2.1

Connectors

Ref In/Ref Out.......................................................................................................36
System drive (HDD/SSD)..................................................................................... 36
Inst Trig.................................................................................................................36
Display Port, DVI.................................................................................................. 37
LAN.......................................................................................................................37
USB/USB In.......................................................................................................... 37
AC power supply connector and
User x................................................................................................................... 37
EFC.......................................................................................................................38
IEC 625/IEEE 488.................................................................................................38
Dig I/Q...................................................................................................................38
HS Dig I/Q.............................................................................................................38
Adv Data/Ctrl........................................................................................................ 38
T/M/C.................................................................................................................... 38
Adv. Trg., Adv. Clk................................................................................................ 39
Mod Ext 1/2...........................................................................................................39
I/Q, I/Q Bar............................................................................................................39
Ref In/Ref Out
Input/output for external reference signal.
BNC connectors for reference signals from 1 MHz to 100 MHz.
SMA connectors for 1 GHz reference signals.
How to: Chapter 3.11, "Connecting to Ref In/Ref
System drive (HDD/SSD)
Hard disk drive (HDD) or solid-state drive (SSD).
For security reasons, the hard disk is bound to the specific R&S SMM100A. You
can remove it from the instrument, but you cannot use it in other instruments.
See also section "Removing the system drive from the R&S SMM100A" in the
user manual.
Inst Trig
BNC connector for input of external trigger signals. The signals trigger sweeps
and list mode.
See chapter "Signal Generation and Triggering in the Sweep and List Modes" in
the user manual.
Getting Started 1179.1335.02 ─ 02
switch................................................................37
Out",
Instrument Tour
Rear Panel Tour
on page 22
36