R&S SMM100A Getting Started page 25

®
R&S SMM100A
See:
● Chapter "Querying Error Messages" in the user manual.
● Chapter "Performing Maintenance Tasks" in the user manual.
To shut down the product
The product is in the ready state.
► Press the [On/Standby] key.
The operating system shuts down. The LED changes to orange.
In the standby state, the power switch circuits and the OCXO are active. To deac-
tivate them, disconnect the instrument from the power supply.
To disconnect from power
The R&S SMM100A is in the standby state.
1. NOTICE! Risk of data loss. If you disconnect the product from power when it
is in the ready state, you can lose settings and data. Shut it down first.
Set the toggle switch on the power supply to position [0].
The LED of the [On/Standby] key is switched off.
2. Disconnect the R&S SMM100A from the power source.
Getting Started 1179.1335.02 ─ 02
Preparing for Use
Switching On or Off
25