R&S SMM100A Getting Started page 42

®
R&S SMM100A
1. On the R&S SMM100A front panel, press the Preset key to start out in a
defined instrument configuration.
2. Set the frequency:
a) On the "Status Bar", tap the "Frequency" field.
b) On the on-screen keypad, enter 1.955 and press the "GHz" key.
The on-screen keypad closes and the frequency value is displayed.
3. On the "Status Bar", tap the "Level" field and enter the level in the same way.
4. Select "Block Diagram > RF Block > On" to enable the output of the generated
unmodulated signal.
Getting Started 1179.1335.02 ─ 02
Trying Out the Instrument
Generating an Unmodulated Carrier
42