R&S SMM100A Getting Started page 58

®
R&S SMM100A
To save the instrument settings to a file
We assume, a test configuration as described in
figuring a Marker
1. Press the Save/Rcl key on the front panel.
2. In the "Save/Recall" dialog box, select "Operation Mode > Save".
Tap the "Filename", use the on-screen keyboard, and enter MyTestSignal.
3. Tap the "Save" button.
The file MyTestSignal.savrcltxt is saved in the default directory /var/
user.
To load saved instrument settings
You can restore the settings to the instrument at any time using the settings file.
1. Press the Preset button to restore the default instrument settings so you can
check that the saved user settings are restored afterwards.
2. Press the Save/Rcl key.
3. In the "Save/Recall" dialog, select "Recall" operation.
Navigate to the directory of the saved file. Select the MyTestSignal file.
Getting Started 1179.1335.02 ─ 02
Signal", on page 53.
Trying Out the Instrument
Saving and Recalling Settings
Chapter 5.4, "Enabling and Con-
58