Table of Contents
Advertisement
®
R&S
SMM100A
4.1.2.2
On/Standby
The [On/Standby] key switches the instrument from the standby to the ready state
or vice versa.
The LED above the [On/Standby] key indicates the instrument state, see
ter 3.13, "Switching On or
4.1.2.3
Function Keys
Function keys provide access to most common generator settings and functions.
A detailed description of the corresponding functions is provided in the user man-
ual.
Table 4-2: Function keys
Function key
[Freq]
[Level]
[Diagram]
[RF on/off]
[Mod on/off]
[★ (User)]
Function execution (in navigation controls area)
[On/Off Toggle]
4.1.2.4
Keypad
The keypad is used to enter alphanumeric parameters, including the correspond-
ing units. It contains the following keys:
Getting Started 1179.1335.02 ─ 02
Off",
on page 24.
Assigned functions
Activates frequency entry.
Activates level entry.
Brings the block diagram to the foreground. Active dialogs are
minimized.
Switches the RF output on and off.
Switches the modulations on and off.
Key with a customizable function. You can define the action to be
executed.
●
Switches highlighted elements or a function block on and off.
●
Switches between two or more settings, e.g. items of selec-
tion lists. At the end of a list, the cursor is set on the first
entry again.
Instrument Tour
Front Panel Tour
Chap-
30
Advertisement
Table of Contents
