Internal Baseband Source ("Baseband" Block) - R&S SMM100A Getting Started

®
R&S SMM100A
For exact information on the available options, and on the minimum requirements
and the interdependencies between the provided options, refer to the
R&S SMM100A data sheet.
Table 6-1: Required options per functional block (excerpt)
Functional block
"Baseband"
"BB Input"
"AWGN"
"I/Q Stream Mapper"
"I/Q Mod"
"I/Q Analog"
"I/Q Digital"
"RF"
6.3

Internal Baseband Source ("Baseband" Block)

The "Baseband" block represents the source of the baseband signals (base-
bands).
This functional block is the access point to:
● The internal baseband generator
The baseband generator contains modules for real time signal generation
(Custom Digital Modulation) and an arbitrary waveform generator (ARB).
● The available digital standards
Generation of digital signals in accordance with the supported standards
requires additional software options. For example, option R&S SMM-K55 gen-
erates signals according to the EUTRA/LTE standard.
● The baseband offsets function
Signals from the baseband generator can be shifted in frequency and phase,
or boosted in power.
Getting Started 1179.1335.02 ─ 02
Internal Baseband Source ("Baseband" Block)
Required option
R&S SMM-B9
-
R&S SMM-K62
-
e.g., R&S SMM-B1006
e.g., R&S SMM-B1006
-
e.g., R&S SMM-B1006
System Overview
67