R&S SMM100A Getting Started page 55

®
R&S SMM100A
This example shows you how to use this graphical display to verify the generated
signal. Use the signal generated in
Marker Signal", on page 53.
To access the graphical signal display functionality
► Perform one of the following:
a) Select "Taskbar > System Configuration > Graphics"
b) On the "Taskbar", tap the wave icon.
The "Graphics Configuration" dialog opens.
To visualize the signal
1. In the "Graphics Configuration" dialog, select "Mode > Constellation".
2. Select "Source > Baseband".
3. Select "Add" to enable signal display.
Getting Started 1179.1335.02 ─ 02
Verifying the Generated Signal with the Graphics Display
Chapter 5.4, "Enabling and Configuring a
Trying Out the Instrument
55