Table of Contents
Advertisement
®
R&S
SMM100A
4.2
Rear Panel Tour
This section provides an overview of the connectors on the rear panel of the
instrument. For technical data of the connectors, refer to the data sheet.
Figure 4-3: Rear panel
1
= Ref In/Ref Out connectors (BNC)
2
= HDD/SSD system drive
3
= Inst Trig connectors (BNC)
4, 5 = Display Port, DVI connectors
6
= LAN connector
7
= USB/USB In connectors
8
= AC power supply connection and main power switch
9
= User x connectors (BNC)
10 = EFC connectors (BNC)
11 = Serial number (six digits in the string 1440.8002.02-<serial number>-<checksum>)
12 = IEC 625/IEEE 488 connector
13 = Dig I/Q connectors
14 = HS Dig I/Q connector
15 = Adv Data/Ctrl connector (provided for future use)
16 = T/M/C and T/M connectors (BNC)
17 = Adv. Trg./ Adv. Clk. connectors
18 = Mod Ext connectors (BNC)
19 = I/Q Bar connectors (BNC)
Getting Started 1179.1335.02 ─ 02
Instrument Tour
Rear Panel Tour
35
Advertisement
Table of Contents
