Table of Contents
Advertisement
®
R&S
SMM100A
Legend
Item
1
Status indicator
2
Functional block
3
Control signal block
4, 6
Signal lines (digital, ana-
log)
5
Graphics indicator
7
Connector icons
8
Stream indicators
7.3.3
Taskbar
The "Taskbar" contains labeled softkeys and minimized views (thumbnails) of
active graphics and dialogs.
Initially, it shows the permanently assigned softkeys. The softkey with the sine
wave denotes that no signal is activated for graphical representation.
Figure 7-2: Taskbar in default state
Whenever you open a settings or graphics dialog, it is automatically assigned to
the "Taskbar". The softkeys shown in the following figure represent the variants.
Getting Started 1179.1335.02 ─ 02
Understanding the Display Information
Description
Indicates whether the signal is running or waiting for a
trigger.
Represents a basic task in signal generation.
The push button provides access to any number of asso-
ciated actions to accomplish the task.
The On/Off (checkbox) and the block label quickly acti-
vates the basic task.
Indicates information on the control signals like signal
content, input or output and provides quick access to the
corresponding configuration dialog.
A dedicated control block is displayed for the baseband
block (3a) and RF block (3b).
Show the currently configured signal flow.
●
Thick lines represent the digital I/Q streams, see (4)
in the figure above
●
Thin lines represent the analog signals (6)
Denotes that the signal is displayed graphically (5a/5b).
Represent the interfaces for signal input and output.
●
RF signal connector output (7a)
Icons vary depending on the frequency.
●
Analog I/Q signal connector output (7b)
●
Digital I/Q signal connector input (7c)
Show the input streams at the I/Q stream mapper.
Instrument Control
75
Advertisement
Table of Contents
