Table of Contents
Advertisement
®
R&S
SMM100A
The status buttons indicate key parameters that are set for the output signal. Most
of the status buttons are virtual keys you can use to open a corresponding menu
or dialog.
7.3.2
Block Diagram
The block diagram shows the current configuration and the signal flow in the gen-
erator with the aid of function blocks, connected by signal lines.
1
= Status indicator
2
= Functional block
3a / 3b
= Control signal block
4
= Signal line (digital)
5a / 5b
= Graphics indicator
6
= Signal line (analog)
7a / 7b / 7c = Connector icons (RF, analog, digital)
8
= Stream indicator
Starting from left up to the "I/Q Stream Mapper", you can see the functional
blocks provided in the baseband domain. After the stream mapper, the analog
section contains the digital to analog conversion and modulation to RF.
Getting Started 1179.1335.02 ─ 02
Understanding the Display Information
Instrument Control
74
Advertisement
Table of Contents
