®
R&S
SMM100A
3. Select "Global Connector Settings > Routing".
4. For "User 2", select "Direction > Input" and "Signal > Global Trigger 1".
The instrument expects an external global trigger event. In the current config-
uration, the "Global Trigger" signal has to be supplied at the input connector
User 2.
The Trigger/Marker/Clock status LEDs in the block diagram confirm that an
external trigger signal is selected; the signal generation is however stopped.
Getting Started 1179.1335.02 ─ 02
Triggering the Instrument with an External Signal
Trying Out the Instrument
51