Table of Contents
Advertisement
MPA Hub Mount I&O Manual
The optional Linearizer has been adjusted for optimum performance at the
factory. Tube replacement will require readjustment of the Linearizer at the
factory by trained personnel (see the service manual for more details).
The user may modify the linearizer settings from the factory values. Doing so
may cause the MPA Hub Mount performance to degrade. For this reason it is
recommended that if the user wants to change these settings, they should
always record the factory set values (below) before making any changes.
Linearizer Adjustment
Gain
Phase
Magnitude
The Linearizer settings can be accessed via the optional CPI remote panel or
through the supplied "Setup & Remote control" Software (see Appendix B).
Doc. 01031254 Rev. 1
Appendix D
Optional Linearizer
Factory set value (0-255)
Optional Linearizer D-1
Advertisement
Table of Contents
