Table of Contents
Advertisement
I N I T I A L P O W E R - O N A N D C H E C K O U T
3.3.2
Control Keys
The Remote Control Unit Control Keys are shown in Figure 3-3.
These keys are functionally grouped as shown in Figure 3-3.
The first pair of keys select the TRANSMIT (RF Out) or STANDBY
(No RF Out) modes (REMOTE mode only).
The second pair of keys selects the Function or Meters display
mode. These keys are active in both the LOCAL and REMOTE
modes.
The RESET key is used to clear faults (in the REMOTE mode).
The ENTER key is used in conjunction with the
keys to
increment the parameters accessible via the FUNCTION key.
(These keys active in REMOTE mode only.)
The AUTO/MAN key is used to change the operational mode of
the optional internal 1:1 switch controller. The manual mode must
be selected for the switch key to be active.
The SWITCH key is used with optional internal redundant 1:1
switch controller. The SWITCH key, when pressed, will command
the waveguide switch to switch the output connections of the two
amplifiers.
3-6
Installation and Operation Manual
Advertisement
Table of Contents
