Table of Contents
Advertisement
MPA Hub Mount I&O Manual
Figure B-8 RF Inhibit state
Changing Parameters
To change the various operating parameter and trip settings, use the
up/down arrow keys to select the parameter to change (highlighted in
green). Press F1 and the color changes to yellow. Now you can use the
up/down arrow keys to scroll through the available settings. Press F1 again
to exit once you have the desired setting or value. In some cases you can enter
the number value directly followed by enter.
Figure B-9 Changing parameters
B-6 Setup & remote control software
Doc. 01031254 Rev. 1
Advertisement
Table of Contents
