Table of Contents
Advertisement
MPA Hub Mount I&O Manual
Fault Reporting
If a real time fault occurs while this program is running and has not yet been
reset, the fault will be reported in the upper left portion of the screen per
Figure B-11.
Figure B-11 Fault reporting
To reset the fault, press "R" on the keyboard.
Fault log
While in the meters screen, the fault log can be accessed.
To access the fault log, press F2 and the screen per Figure B-12 should appear.
The fault log will show the last 5 faults that occurred in the MPA.
If multiple faults occurred at the same time they will be reported on the same
entry line.
To clear the fault log, press F5. Return to meters screen by pressing F3.
B-8 Setup & remote control software
Doc. 01031254 Rev. 1
Advertisement
Table of Contents
